That means, in my case, I set the default device to the on-board soundcard. Is there any way to get rid of these? So whatever USB keyboard you are using should be set up as well as your audio settings. Thanks for the tip I’m happy with being able to get in and out 24Bits. Driver is the latest one I could find 1.
|Date Added:||2 June 2018|
|File Size:||52.57 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Oct 14, at 7: When I try to listen to music, I get lots of pops and clicks that annoys me greatly.
Go into the audio settings and change it to a WDM driver. Post 3 of 8. Try this if you like: Oct 15, at 6: Log in Become a member. Oh and one more thing: However, Aaio find that running at The lowest latency with Logic is 9 ms, which is barely ok for real-time applications. This is my 2 cents, but anyways here I go: The web sites for SRC are posted in the how to make foobar usable thread.
EDIROL UA-1EX ASIO Problem – Soundsonline-Forums
I do hope this helps and doesn’t patronise you. The latency isn’t the best, but even with more expensive USB interfaces you won’t get better results when working with a DAW.
You can also try using direct stream instead of ASIO and let the card do the resampling. Another thing to consider, are the settings being retained by the PLAY standalone. I also connected the Edirol to a USB port which is part of a pair of ports which was unused, so it is doesn’t share it.
Do you experience this problem? Also no sounds when I play use the device. Headphone Reviews and Discussion – Head-Fi. Once you try to reduce this value you’ll start to have serious problems. Our members also liked: Regret is the optical minijack the toslink would have been more convenient.
You have to close the software, disconnect the audio interface, switch the jumper to the play position and relaunch the software!!! Plastic and assembly are really Camelott, but for 89 EUR Next, I am going to try a resampling plugin from here: Post 6 of 8.
It’s better to disable all other USB devices if possible when you use the unit to avoid any problems. It is not too bad; with foobar buffer set at ms and Edirol buffer set to 1 notch before max.
Help With ASIO (Edirol UA-1EX)
Your username or email address: Find all posts by encorehuang. See if the same applies for your case Very practical for monitoring and recording simultaneously correct quality trs.
The analog RCA input is bridged with the mic input and there is no input selector nor a separate control for each, so if you want to record a high level signal ua-11ex get tons of noise, even without a mic. The sound of the headphone output is very bad, especially at loud volumes, the signal has no dynamics and you can hear distortion in the low-mid range.
Find all posts by interpolate.