BENQ PB8260 DRIVER

Don’t show me this message again. Next, a projector boot screen displays as below. Do not place liquids near or on the projector. User Logo Enables the user to select which logo screen will appear during projector start-up. If you try to re- start the projector, it will shutdown again.

Uploader: Shaktirr
Date Added: 26 November 2006
File Size: 64.39 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 77113
Price: Free* [*Free Regsitration Required]

Turn an old monitor into a wall display with a Raspberry Pi Turn an old monitor into a wall display with a Raspberry Pi by Taylor Martin. Image menu Some picture adjustments are available only when certain input ports are in use.

BenQ PB DLP Projektor | eBay

Refer to page The following example describes the adjustment of bp8260 keystone. S-Video devices Video devices or VCR If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the video source is turned on and operating correctly.

Page 7 Safety Instructions Continued Do not place this projector in any of the following environments. Adjusting The Image Adjusting the image Adjusting the height Lb8260 your projector on a flat level surface and ensure that the projector is square to the screen.

BenQ PB8260 User Manual

Connection Wireless connection This is the recommended and most convenient way of using this projector. Comments to this Manuals Your Name.

  82801GB I O CONTROLLER HUB AC 97 AUDIO DRIVER

Lamp Information When the Lamp Indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp. Also check that the signal cables have been connected correctly. Allow at least 50 cm clearance from walls and free flow of air around the projector. Power indicator light Lights up or flashes when the projector is under operation. Don’t show me this message again.

Table Of Beq Introduction BenQ logo is projected.

Connection Connection Wireless connection This is the recommended and most convenient way of using this projector. If any of these items are missing, please contact your place of purchase.

Copyright Copyright by BenQ Corporation. Press Menu key on pn8260 projector or the remote control.

BENQ PB USER MANUAL Pdf Download.

Operation in the on-screen menus 1. Page of 53 Go. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. If the power outlet has a switch, make sure that it is switched on. Connecting To Display Devices S-Video devices Video devices or VCR If the selected video image is not displayed after the projector is turned on and bdnq correct video source has been selected, check that the video source is turned on and operating correctly.

  GENIUS PPM5128 DRIVER

User Logo Enables the benqq to select which logo screen will appear during projector start-up. RGB, S-Video, component video, composite video. Turn the power off and disconnect the projector from the wall socket. Page 46 Maintenance The projector has shutdown automatically.

BenQ PB8260 DLP projector Series

If you try to re- start the projector, it will shutdown again. Pip picture In Picture Operation More functions are available in the on-screen menus. Got it, continue to print. If the problem persists, contact qualified service personnel for further help.

Cyber Monday beenq on storage: Freezing The Image To reach a preferred sound quality, you can adjust the treble and bass levels in the Ensure the projector is connected to an audio output device with a correct audio cable.

Instead of having glass panels LCD through which light is passed, the DLP chip’s surface is made up of thousands of tiny mirrors each representing a single pixel. Components by Joshua Goldman Nov 26, With the use of this wireless projector, there’s no need to worry about cable connections.